No Hot Water? Common Causes & Tips to Deal with Yourself
No Hot Water? Common Causes & Tips to Deal with Yourself
Blog Article
Were you in search of ideas concerning Hot Water Heater Repair?
Lots of contemporary houses make use of an electrical hot water heater for their heating unit, as a result of its comfort and simplicity of use. Nonetheless, similar to any other electric appliances, problems might occur with its use, suddenly. It can be actually discouraging to wake up to a cold shower as opposed to a hot one or having your bathroom with water that isn't hot adequate and even too warm. Whatever the case might be, hot water heater problems can be rather aggravating. Luckily, we've made a checklist of possible remedies to your water heater concerns. There are a number of variables that could create a lot of these troubles, it could be a concern with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for security. Whatever the problem is, getting it repaired need to not position way too much of an issue if you comply with these actions:
Check Your Power Supply:
As fundamental as this might seem, it is extremely essential. Without sufficient power, your hot water heater will certainly not work. So the first thing to do when your water instantly stops working is to verify that it isn't a power trouble. Check if the fuse is blown out or the breaker stumbled. If the circuit breaker is the problem, merely transform it off and on once again. Change any broken or damaged fuse. Examine the appliance with power after these modifications to see if it's currently functioning.
Examine the Heating Element in the Water Heater:
If it's not a power issue, after that try having a look at your heating element if it is still functioning. Examine each of your heating elements to be sure the issue isn't with any one of them. If any one of them is damaged, replace that part and after that inspect whether the warm water is back on.
Examine Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't hot enough, you might require to examine the temperature level setups on your upper thermostat. Ensure the circuit breaker is switched off before doing anything. Open the access panel and press the red button for temperature reset above the thermostat. This must assist warm the water. Transform the breaker back on and also examine if the trouble has actually been resolved.
Call A Professional:
If after replacing all defective parts and resetting your temperature, the water heater still isn't working, you may need to contact an expert plumber for a professional opinion. The problem with your heater could be that the hot and cold faucets have actually been switched over or it might be undersized for the quantity of warm water required in your home. Whatever the situation may be, a professional plumber would help solve the trouble.
Verdict
Hot water heater issues are not constantly major. A lot of them are due to minor concerns like a blown fuse or damaged burner. Replacing the faulty parts should do the trick. However, if you are still unable to address the trouble, give a call to your local plumber ahead to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I hope you liked our article on How to Troubleshoot and Repair an Electric Water Heater. Many thanks for taking a few minutes to read our post. Enjoyed reading our post? Please share it. Help others discover it. Thank you for your time. Visit us again soon.
Book A Service Call
Report this page